1 / 1
| Base Material | PET Polyester Film |
| Thickness | 50μm |
| Hardening Layer Hardness | 2H/500g |
| Width | 1250mm |
| Tensile Strength | Greater than 150Mpa |
| MIT Bend Life | Greater than 20,000 times |
| Temperature Adaptability | Can withstand 120°C for 30 minutes when using PET protective film; can withstand 90°C for 30 minutes when using PE protective film. |
| Optical Properties | Light transmittance over 90%, haze no more than 2% |
| Other Options | Double-sided PE protective film or single-sided PE and single-sided PET protective film |
| Packaging Dimensions | 30X30X130 cm |
| Gross Weight | 130~150KG |
| Delivery Time | 7~10 days |
| Certificates | ROHS, CE, SGS |
| MOQ | 3000~5000 meters |
Elevate every surface with our next-generation PETG decorative film—a 100 % virgin resin skin purpose-built for PUR lamination lines. This ultra-elastic PETG wall-panel film melts at 130 °C and wets into solvent-free adhesives, locking MDF, WPC or lightweight PVC boards under a seamless, edge-tight wrap. From brushed champagne to deep concrete textures, each 1 260 mm roll of PETG décor membrane carries 3 H pencil hardness, coffee-proof chemistry and UV-blockers that keep color true for 10-year interior warranty.
Interior studios specify the same grade as PVC bar decorative film, trusting its anti-fingerprint topcoat to survive nightly wipe-downs on club counters, kitchen islands and lift-high tabletops. Zero chlorine, zero formaldehyde and full recyclability let the PETG wall-panel film sail past LEED v4 and REACH thresholds, while its low gloss variant diffuses light at 8 units for luxury matte walls.
Switch your PUR lamination machine Product line to this fast-tack PETG decorative film and cut cycle time 30 %—no sanding, no primer, no post-polish. Slit-to-width rolls ship in 5 days, ready to turn furniture, cabinetry and commercial bars into gallery-grade statements with one sustainable, stunning PETG home decorative film.
It is designed for PUR lamination lines, ideal for wrap-finishing MDF, WPC, or lightweight PVC boards. It is widely used for wall panels, furniture, cabinetry, kitchen islands, and commercial bar counters.
The film is highly adaptable to heat: it can withstand temperatures up to 120°C for 30 minutes when using PET protective film, and up to 90°C for 30 minutes with PE protective film.
Yes. The PETG film is environmentally friendly with zero chlorine and zero formaldehyde. It is fully recyclable and complies with ROHS, CE, SGS, LEED v4, and REACH standards.
It features a hardening layer hardness of 2H/500g (with 3H pencil hardness variants), a tensile strength exceeding 150Mpa, and an MIT bend life of over 20,000 times.
The minimum order quantity (MOQ) is 3,000 to 5,000 meters. Standard delivery takes 7 to 10 days, while custom slit-to-width rolls can ship in as fast as 5 days.
